KUFS2000C Explosion-Proof Clamp On type Ultrasonic Flow Meter
Introduction
The KUFS2000C flow meter adopts isolated explosion proof, grade DΙΙBT5 . Clamp on sensors are installed on the pipe. After gluing and sealing, grade will be Intrinsically safe explosion. Suitable for pipe sizes from DN32mm to DN6000mm.
Dimensions
Standard Clamp On Sensor
- Built-in magnet, easy to be absorbed on pipe
- IP68
- Measuring range: DN32~DN6000
- Temperature range: – 30~90℃
| Type | Model | Measuring Range | Temperature | Dimension |
| Small Size | TS-2 | DN32~DN100 | – 30~90℃ | 45×25×28mm |
| Middle Size | TM-1 | DN50~DN700 | – 30~90℃ | 64×39×44mm |
| Large Size | TL-1 | DN300~DN6000 | – 30~90℃ | 97×54×53mm |
High Temperature Clamp On Sensor
- Built-in magnet, easy to be absorbed on pipe
- IP68
- Measuring range: DN32~DN6000
- Temperature range: – 30~160℃
| Type | Model | Measuring Range | Temperature | Dimension |
| Small Size | TS-2-HT | DN32~DN100 | – 30~160℃ | 45×25×28mm |
| Middle Size | TM-1-HT | DN50~DN700 | – 30~160℃ | 64×39×44mm |
| Large Size | TL-1-HT | DN300~DN6000 | – 30~160℃ | 97×54×53mm |
Mounting Bracket Clamp On Sensor
- Improve installation efficiency and accuracy
- IP68
- Measuring range: DN32~DN700
- Temperature range: – 30~160℃
| Type | Model | Measuring Range | Temperature | Dimension |
| Standard Small Size Sensor | HS | DN32~DN100 | – 40~90℃ | 318×59×85mm |
| Standard Middle Size Sensor | HM | DN50~DN300 | – 40~90℃ | 568×59×85mm |
| Extended (bracket only) | EB-1 | ＞DN300 | – 40~90℃ | 88×59×49mm |
| High Temp. Small Size Sensor | HS-HT | DN32~DN100 | – 40~160℃ | 318×59×145mm |
| High Temp. Middle Size Sensor | HM-HT | DN50~DN300 | – 40~160℃ | 568×59×145mm |
| Extended (bracket only) | EB-1-HT | ＞DN300 | – 40~160℃ | 88×59×49mm |
Ordering Information
| Parameter | Parameter | |
|---|---|---|
| Working Condition | Main Unit | Sensor |
| Protection | IP65 | IP68 |
| Humidity | ≤85%RH | |
| Temperature | -20~60℃ | -30~160℃ |
| Basic Parameters | ||
| Accuracy | ≤1% | |
| Velocity Range | 0~±10m/s, Bi-directional measurement | |
| Pipe Size | DN32~DN6000 | |
| Temperature | - 30~160℃ | |
| Type of Liquid | Single liquid can transmit sound wave. such as water, sea water, sewage, oil, chemicals , alcohol, etc | |
| Pipe Material | Steel, Stainless steel, Cast iron, Copper, PVC, Aluminum, Glass steel, etc. Liner is allowed | |
| Signal Output | 1 way 4-20mA output(impedance 0~1K, accuracy 0.1%) 1 way OCT pulse output( Pulse width 6 ~ 1000ms) 1 way relay output |
|
| Signal Input | 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor. | |
| Interface | RS485, support MODBUS | |
| Data Storage | SD card regularly store the pre-set results (optional) | |
| Power Supply | DC8~36V or AC85~264V | |
Clamp On type Ultrasonic Flow Meter installation
