KWS-910 Online TSS Sensor for Municipal Wastewater Treatment
Introduction
The Kacise KWS-910 self-cleaning suspended solids sensor is designed for continuous sludge concentration monitoring in municipal wastewater treatment plants. By adopting near-infrared optical scattering technology and an adaptive anti-interference algorithm, it effectively eliminates the impact of ambient light. The sapphire optical structure ensures excellent stability, while the built-in automatic cleaning brush reduces fouling and bubble interference, enabling long-term, low-maintenance operation without chemical reagents.
Feature
- Digital sensor, RS-485 output, support MODBUS
- With automatic cleaning brush to prevent contamination and eliminate air bubbles
- Compensate the color of the water to eliminate the interference of color on the measurement
- Fiber-optic structure, not affected by ambient light
Dimension
Wiring
Red—Power (VCC)
White—485B
Green—485A
Black—Ground (GND)
| Item | Self-cleaning Sludge Concentration Sensor |
|---|---|
| Principle | Infrared scattering method |
| Measuring Range | 0.5-4000 mg/L (0-15000mg/L optional) |
| Accuracy | ±5% |
| Resolution | 0.1mg/L |
| Protection Rate | IP68 |
| Max. Pressure | 3 bar |
| Temperature Range | 0 ~ 50℃ |
| Output | support RS-485, MODBUS protocol |
| Power Consumption | 0.2W (not wiping), 0.6W (wiping) DC 9~24V, >500mA |
| Installation | NPT3/4, Input type |
| Size | Φ36mm*198.2mm |
| Self-Cleaning System | Yes |
| Casing Material | Titanium |
| Calibration | 1 point or 2 points |
The product demonstration video is under preparation and will be released shortly.
