KDF1100 Wall-mounted Ultrasonic Doppler Flow Meter

1.Introduction

The ultrasonic Doppler flowmeter is a host that collects the flow velocity, water level and temperature of the ultrasonic Doppler flowmeter through RS485, and inputs various channel parameters according to the actual situation on site. The water flow area S (㎡) is calculated using the channel parameters and the collected water level H (m), and the instantaneous flow rate (Q = V * S) is calculated by multiplying the water flow area and the flow velocity V (m/s), and the cumulative flow rate is calculated by multiplying the flow rate by the cumulative time.

From this we can know:Q = V * S

Instantaneous flow rate * time difference = cumulative flow rate

2.Dimensions

2.1 Product picture

KDF1100 Wall-mounted Ultrasonic Doppler Flow Meter (host) physical picture KDF1100 Wall-mounted Ultrasonic Doppler Flow MeterPhysical picture of the sensor (including all accessories)

2.2 structure size

The dimensions without installation accessories are width × height × thickness = 200 × 215 × 90m.

KDF1100 Wall-mounted Ultrasonic Doppler Flow Meter dimensions

ParameterSpecification
Power supplyPower supply range: 10.8VDC~26.4VDC;
RS485 12V power consumption: 62.5mA±1mA (about 0.75W)
RS485 24V power consumption: 35.5mA±1mA (about 0.85W)
RS485+4~20mA 12V power consumption: 65mA±1mA (about 0.78W)
RS485+4~20mA 24V power consumption: 38mA±1mA (about 0.91W)
Output characteristicsRS485/ModBus standard protocol; 4~20mA (not included by factory default)
LCD backlight display: 128*64
Measurement performanceFlow range: 1L/s~99999.99m3/h;
Water depth range: 0.02~3m, 0.02~10m (please confirm the maximum water depth before ordering);
Display interface 1: water level, instantaneous flow, cumulative flow;
Display interface 2: water level, flow rate, cross-sectional area, temperature;
Flow resolution: 0.0001L/s.
Physical propertiesSplit shell material: ABS+PC, sensor material: POM;
Sensor protection level: IP68;
Transmitter protection level: IP65;
Cable between sensor: 4-core shielded cable with air duct, factory default length 10 meters, wire diameter 8mm (other wire lengths need to be customized).
Working environmentWorking temperature: -5~60℃ (non-freezing state);
Storage temperature: -25~80℃;
KDF1100 Wall-Mounted Ultrasonic Doppler Flow Meter | Installation & How to Use ?

Customer Reviews

Write or update your review


Already reviewed this product? Submitting again adds your new text and photos to your existing review — your original rating is kept.




First review: please write at least 10 characters. Adding to an existing review: a photo alone is fine.


Contact Us


Scroll to Top

Your inquiry will be responseed in 12 hours .
For any urgent case, you can contact us via whatsapp or phone.

whatsapp
Tel
thank-you